User's Manual

© SENSITECH INC. Page 7 of 10
T11012860 User Manual
3. Using the Device
3.1. Starting the device:
To start the device, press the START button. If the Start Key feature is enabled, the START
button must be held down for 3 seconds. The device may only be started from sleep mode.
3.2. Stopping the device:
To stop the device, press the START button. If the Stop Key feature is enabled, the START
button must be held down for 5 seconds to stop.
3.3. Status Check the device:
To check the status of the device, press the STATUS button. The STATUS button will
indicate the device mode with a unique LED blink pattern. See table below.
3.3.1. Status LED Indicators
16
Un-configured mode, Not Started
4
Customer Ready Mode, Not Started
2
Running, Started
1
Stopped, Not Started