User's Manual

Sensitech TempTale RF
2
System Installation Manual Revision 8
Page 7
2.2. Gateway Assembly
When you receive the Gateway, carefully remove it from the shipping container and inspect for damage,
especially if the shipping packaging appears to be damaged. If you determine there has been shipping
damage, contact the carrier immediately.
Determine if 915 MHz or 868 MHz antennas are required, and attach them as indicated in the diagram
below. The 915 MHz antennas have two yellow stripes and the 868 MHz antennas have two gray
stripes.
If you attach the wrong antennas, the RF performance of the Gateway may be degraded.