Software Manual

Sensor ID s.r.l.
c/o Sviluppo Italia Molise • Via don G. Mucciardi 5 • 86020 Campochiaro (CB) • Italy
Tel./Fax: [phone] • P.IVA 01614260709 • E-mail: [e-mail] • Web site: www.sensorid.it
6.1 Firmware/Hardware
These fields show the firmware and hardware revision of UHF Reader
6.2 Power
Using the power tab it’s possible increase or decrease the RF power emitted by the reader.
In particular the maximum power is 10 and minimum is 1. After select the desired value, press confirm button to set it.
6.3 Distance
The distance tab increase or decrease the reading distance.
In particular the maximum distance is 10 and minimum is 1. After select the desired value, press confirm button to set
it. This parameter use both the RF power and the sensitivity in reception of the reader to set a desired reading distance.
6.4 TID Memory size
This tab defines the number of byte to read in TID memory.