Specification Sheet

ManualsBrandsSensor Switch ManualsElectricalSensor Switch CM 10 Passive Infrared Extended Range Ceiling Mount Occupancy Sensor

1 of 3

OVERVIEW

The CM family of ceiling mount occupancy sensors provide a range sensor solutions for

applications with ﬁnished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors

utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options,

providing ﬂexibility for multiple mounting height and coverage pattern requirements. Dual

technology (PDT) occupancy detection can also be added as an option for applications where

occupants are stationary for long periods of time.

FEATURES

• 360° coverage pattern

• Push- button programmable, adjustable time delays, and multiple operating modes

• 100 hr lamp burn-in timer

• No field calibration or sensitivity adjustments required

• Convenient test mode

• Green LED indicator

CM PDT

ORDERING INFORMATION

CM Family

Series Detection Technology Coverage Type Relay Additional Features (choose 1) Temp / Humidity

CM Ceiling Mount

Sensor

[blank] PIR

PDT* Dual Technology

(PIR/ Microphonics)

High Bay 360°

Small Motion 360°

Large Motion 360°

11 Hallway

[blank] None

R Low Voltage Relay

[blank] None

D Occupancy Controlled

Dimming

P Photocell

ADC** Photocell w/ Dimming

[blank] Standard

LT Low Temp/ High

humidity

Size: 4.55" diameter and 1.55" deep

Weight: 6 oz

Mounting: 3.5" octagon box, ceiling tile surface, single gang box

Color: White

Operating Voltage: 12-24 VAC/VDC

Current Draw: Standard 4 mA ,w/ R option 16 mA

Dimming Load: Sinks <20 mA; ~40 Ballasts @ .5 mA each

Rcmd. Power Pack: PP20

ROHS compliant

SPECIFICATIONS

Warranty

Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

Speciﬁcations subject to change without notice.

Catalog Number: Date: Project:

Example: CM PDT 11 R LT

* PDT option not available on CM 6 models

** ADC option not available on CM6 models

C US LISTED

Summary of content (3 pages)

PAGE 1
Catalog Number: Date: Project: OVERVIEW The CM family of ceiling mount occupancy sensors provide a range sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements.
PAGE 2
COVERAGE PATTERNS SMALL MOTION 360º (Model # CM 9/ CM PDT 91) • Best choice for small motion (e.g. hand movements) detection • 360º conical shaped pattern • Provides 12 ft (3.66 m) radial coverage (~500 ft2) when mounted to standard 9 ft (2.74 m) ceiling • 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial coverage • Lens assembly is marked with a gray ring around lens to differentiate versus the #10 lens TOP VIEW SIDE VIEW 0 ft 9 3.7 12 1.8 6 0m 0 ft 1.
PAGE 3
WIRING (DO NOT WIRE HOT) STANDARD WIRING RED - Power Input (12-24 VAC/VDC) BLACK - Common WHITE - Occupancy State (high VDC for occupied) PHOTOCELL/DIMMING OPTIONS (D, P, ADC) BLUE - Direct output to power pack for providing photocell control and/or secondary dim time out. Output is high VDC with occupancy & low light. Output also held high during secondary dim time out. For multi-level control, use two power packs and connect White wire to primary load and Blue to daylight load.