Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitycontrols.com
© 2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/30/21
RCMS
1 of 3
rCMS Example: RCMS PDT 10 AR G2
Series / Detection Power Supply
1
Occupancy Detection Lens (Required) Operating Mode Generation
RCMS nLight AIR
occupancy and
daylight sensor
[blank] Power Supply
ordered
separately
PS 150 Standard 150 mA
Power Supply
[blank] PIR Detection
PDT
2
Dual Tech PIR/
Microphonics
10 Large Motion/ Extended
Range 360°
9 Small Motion/ Extended
Range 360°
6 High Bay 360° Lens
[BLANK] None
AR Auxiliary Relay
G2 Generation 2
compatibility
OVERVIEW
The rCMS family of nLight AIR-enabled wireless ceiling/surface mount occupancy sensors provide a range
of sensor solutions for applications with nished ceilings (e.g. ceiling tiles, sheetrock, plaster). The rCMS
family sensors utilize digital Passive Infrared (PIR) detection and are available with several lens options,
providing exibility for multiple mounting height and coverage pattern requirements. Dual technology
occupancy detection can also be added as an option for applications where occupants are stationary for
long periods of time. All sensors have integrated on/off photocells, with automatic daylight harvesting/
dimming control standard. Additionally, the rCMS family sensors are also available with an optional
auxiliary low voltage relay for simple integration with a BMS system or other building system.
The rCMS family sensors are powered by an nLight AIR Power Pack (rPP20) or by a 24V DC supply (PS150).
rCMS family sensors typically communicate with one or more nLight AIR-enabled xtures or Power Packs
to enable control of xtures individually or in groups.
FEATURES
• Digital PIR detection
• Integrated, dimming photocell standard — Photocell views down through sensor lens
• Provides automatic dimming control between min and max trim levels
• Works during occupied periods when applied with an occupancy behavior
• Optional auxiliary low voltage solid-state relay (AR option) for dry contact output
• LED status indicator
• Adjustable settings (e.g. occupancy time delays, photocell set-points) via CLAIRITY+ Mobile App or
SensorView software application
• Powered by 24V DC from rPP20 or nLight PS 150 power supply
• Standards-based nLight AIR 900 MHz
nLight
®
AIR
rCMS
Ceiling Mounted
Smart Sensor
ORDERING INFORMATION
Catalog Number: Date: Project:
rCMS 9
rCMS 10
rCMS 6
1. PS 150 or RPP20 24V required to power RCMS. Can also be ordered separately.
2. Must be ordered with 10 or 9.
Warranty
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice
nLight, nLight AIR and the Acuity Controls and Acuity Brands logos are trademarks of Acuity Brands. Bluetooth is a trademark of
Bluetooth SIG, Inc. used by Acuity Brands under license. Apple and the Apple logo are trademarks of Apple Inc. Android and Google Play
are trademarks of Google, Inc. Other trademarks are property of their respective owners.