User's Manual

Quick Start Guide for the SENSOR Hub (217E-C001)

(Also available at www.sensorglobal.com/installguide)

Before installation of any SENSOR Hubs or alarms ensure you have

downloaded and installed the SENSOR App on your mobile device.

The SENSOR app is available for Apple (iOS) and Android devices.

Please visit www.sensorglobal.com/app to find the right app for your

device.

Hub Pairing Process

Step 1. Unpack the SENSOR Hub and ensure that the following are present:

1 X SENSOR Hub

1 X Packet of fixing screws and plugs

1 X Power lead

Step 2. Power on the Hub by turning the power switch on the back of the Hub to

the up position (past the middle position). Both the green and blue lights on the

Hub will begin to flash.

Step 3. Open the SENSOR app on your mobile device to begin the activation and

pairing process. This process will take a few minutes to initialise. After connection,

the Hub will be ready to pair with alarms.

Step 4. Login to the SENSOR app and select the relevant property.

Step 5. Scan the QR code on the rear of the Hub using the app. The Hub’s unique

serial number will be automatically populated into the app.