User's Manual

that the lead is fed through the hole in the mounting plate as shown in Fig 2 and

Fig 3,

Step 17. Plug the power lead into the SENSOR hub. Locate the black power

switch on the rear of the Hub and push it up to the On position. Note that the Hub

has been designed in such a way that, after the initial setup and installation, the

power switch will automatically return to the On position when the Hub is attached

to the mounting plate.

Step 18. Return the power to the electrical circuit if safe to do so.

Ensure that the Hub has turned on. A steady green indicator light confirms the

presence of 230V power.

Step 19. Attach the Hub to the mounting plate, as shown in the Fig 4,

FIG1. FIG2.