User's Manual

Step 23. Place the alarm in the open position by gently opening the plastic

terminal cover. With the alarm in the open position mark the ceiling and install the

plugs provided.

Step 24. Connect the power to the three terminals on the reverse side of the

mounting plate as shown in Fig 5. Once the terminals are adequately tightened,

gently close the plastic terminal cover until it clicks as shown in Fig 6.

NOTE: The middle terminal is for an earth and not for a wired interconnect.

FIG5. FIG6.

Step 25. With the alarm still in the open position, use the screws provided to fasten

the alarm to the Installed plugs.

Step 26. Return the power to the electrical circuit if safe to do so.

Step 27. The installation is successful if the green indicator light on the alarm is

solid and not flashing.

10 Year Lithium Battery Installation