User's Manual

THIS ALARM IS A HINGED DESIGN AND THE ALARM CANNOT BE REMOVED

FROM THE BASE PLATE FOR INSTALLATION. TAKE CARE WHEN INSTALLING

TO ENSURE THAT EXSESSIVE PRESSURE IS NOT APPLIED TO THE ALARM

WHILE IN THE OPEN POSITION.

Step 28. Identify the installation or replacement location.

Step 29. Ensure that the location selected is compliant to local rules.

Step 30. Place the alarm in the open position by gently opening the plastic

terminal cover. Mark the ceiling in the identified installation position. Install the

plugs provided, Also ensure that the plastic terminal cover is gently closed until it

clicks as shown in Fig 6.

Step 31. With the alarm in the open position, use the screws provided to fasten the

alarm to the installed plugs.

Step 32. As there is no mains power, there will not be a green light on the alarm.

However, the alarm may beep a few times as it powers up.

FIG5. FIG6.