User's Manual

• RF disconnect warning – should an alarm become disconnected from the

network a notification will be sent via the portal.

• 230 V power outage – if power is lost to the alarm or hub a notification will

be sent via the portal.

Disclaimers

All electrical installations must be carried out by a qualified electrician, in

accordance with local regulations and Australian Standards.

It remains the duty of the installer to ensure that:

• All hardware is undamaged and in proper operating order,

• The correct number of alarms are being installed in compliant locations as

per the local requirements.

This product must only be used for the purpose described in these instructions and

must be installed by a licensed electrician in accordance with the Building Code

Australia (BCA) and local and state wiring rules and regulations.