SMART BAND
1.Key features Activity tracking, body temperature and blood pressure monitoring, heart rate monitoring, sleep monitoring, message notifications, raise hand to brighten the screen, sedentary and drink reminders, app data sync, analyzing and reporting, waterproof IP67. 2.Basic operations Long press touch button S seconds to turn on the device Short press touch button: Wake up the screen, switch to different function mode Long press touch button: Enter Menu. 3.
4.Function interfaces 4.1 Main interface (3 kinds of dials) On the main interface, long press touch button can switch dials. 4.2 Pedometer (step counting)/distance/calories At 12 AM, the step counting data of the bracelet will automatically clear to zero. Counters can also be reset any time manually.
.3 Health Keep tapping the touch panel until the display shows the "health" icon. See demo here: https://vimeo.com/446967348 1) Body Temperature From the "health" interface, long press the touch panel to enter the thermometer screen. The smart band should be worn on the left wrist, 1.5cm from the wrist joints. Make sure the smart band is close enough with your skin to detect the temperature. Use the thermometer function after 10mins of wearing the smart band.
3) Blood Pressure From the "health" interface, long press the touch panel to enter, then choose the Blood Pressure Mode by tapping the touch panel. Please keep the arm still until the measurement is completed. 4) Blood Oxygen From the "health" interface, long press the touch panel to enter, then choose the Blood Oxygen Mode by tapping the touch panel. Please keep the arm still until the measurement is completed. 4.4 Sleep Monitoring The sleep monitoring time period is from 22:00 to 08:00 the next day.
4.6 Notifications Displays the most recent notifications related to phone calls, text messages, WhatsApp and Facebook notifications, etc. 4.7 More/Tools 1111 Long press to enter the secondary menu to perform functions. S.
3) Once the app installation is complete, launch the app, go to "Device" and tap "Add device", choosing the right name from the list (SENS018T). 4) After the device is successfully connected, the time, date and language on the bracelet will be automatically synchronized with the smart phone. Note: some languages may not be supported. 5) Disconnecting the device a) Cancel the pairing or turn off Bluetooth via mobile phone system settings. b) Unbind the smart band via "More" function in the mobile App.
6. Troubleshooting 1) Smart band does not turn on: connect to the charger to re-activate the bracelet. 2) No Bluetooth connection: a. Please make sure that the Bluetooth of the mobile phone is turned on and the smart band is turned on; b. Please make sure that the smart band is not bonded to other mobile phones; c. Please keep the smart band and the mobile phone as close as possible when during Bluetooth pairing. 3) Notifications are not received by the smart band: a.
7. Main Specs Processor: BK3431 Display : LCD TFT 0.96 inch Battery capacity: 90mAh Waterproof: IP67 Working time: 5-7days OS: Android 5.1 and above & 10S 10.0 and above Heart Rate: Built-in Wake up screen automatically: Built-in Bluetooth: BLE 4.0 NOT A MEDICAL DEVICE. THE DATA GENERATED BY SENSORIA SMART BAND IS FOR USER REFERENCE ONLY AND SHOULD NOT BE USED AS A DIAGNOSTIC TOOL.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.