Model No. SensoAirDry User Manual Thank you for selecting our high-quality dehumidifier. Please read this manual carefully before using the appliance. If you have any questions, please contact the customer service for help. Keep this manual in a safe place for future reference.
List of contents Important Safety Instructions……………………………………………………………………………………….3 Parts and Features ………….…………………………………………………………………………………………...5 Control Panel ..…………………………………………………………………………………………………………….6 Operation …………………………………………………………………………………………………………………….7 Water drainage ……………………………………………………………………………………………………………10 Maintenance .………………………………………………………………………………………………………………12 Trouble shooting ……..………………………………………………………………………………………………….
WARNING Do not attempt to repair, dismantle or modify this appliance as it may lead to damage to the device. Even replacing the power cord should be done by qualified technical staff. PARTS AND TECHNICAL FEATURES Features When initializing the appliance for first use, the device will automatically start dehumidifying in low fan speed and default humidity set at 70% RH.
CONTROL PANEL 1. TIMER 2. FAN SPEED 3. NEGATIVE INONISING 4. SETTINGS Button 5. OPERATING MODE 6. POWER 7. LOW FAN Indicator (LOWER) 11. POWER Indicator 8. HIGH FAN Indicator (HIGH) 12. Dehumidification Indicator (D. H.) 9. TIMER Indicator 13. Negative IONIZATION Indicator (ION.) 10. WATER FULL Control Indicator (W. F.
OPERATING At first start-up: After turning on the appliance you will hear a short acoustic BEEP sound. The appliance is not yet running and the POWER indicator will flash. Operating the appliance: Press the POWER button to enter automatic dehumidification mode. When the appliance is running for the first time the standard mode is low fan speed and default humidity set at RH70%. Next you can select the desired ambient humidity level.
OPERATING MODE Button Press the MODE button to select the operating mode and choose the fan speed and the dehumidification level. The fan speed indicator LOW FAN will flash green and the indicator for dehumidification will flash while setting the humidity level. During the setting process the appliance will run in low fan speed only and the fan speed can not be adjusted.
Control Indicator „Water full“ (W. F.) When the maximum filling level of the water tank is reached, the appliance is automatically shut off, the WATER FULL (W. F.) control indicator is flashing and an acoustic alarm is sounded for five seconds. Empty the water tank following instructions below. When the water tank is reinserted, the appliance resumes its interrupted operation. Memory function in the case of power outage When the SETTINGS button is pressed, the operating parameters are automatically stored.
CAUTION! 1. When the power is restored after a power outage, please wait with resuming dehumidification operation for at least three minutes to avoid any damage to the compressor unit. 2. Always put the appliance on a sturdy and level floor and ensure adequate ventilation. Leave at least 30cm of free space around the appliance (if no drainage hose is connected). 3. During defrosting the dehumidification indicator will flash and the compressor will be idle. WATER DRAINAGE Water tank The control indicator W.
Continuous Drainage 1. Remove the water tank from the appliance. 2. Attach a PVC hose (Ø 12mm, 300mm recommended length) unto the water drainage nozzle and guide the other end of the hose to a discharge on the floor or to a water collection tank. Remark: The PVC hose is not included in the scope of delivery. CAUTION! 1. Never block the drainage nozzle or the PVC hose, otherwise damage to the product may result. 2.
MAINTENANCE WARNING: TO AVOID ELECTRIC SHOCKS TURN OFF THE APPLIANCE AND UNPLUG THE POWER CORD BEFORE ANY REPAIR OR MAINTENANCE. Cleaning Unplug the power cord before each cleaning. Clean the appliance with soft damp cloth. Do not use chemical solvents (such as benzene, alcohol or cleaning petrol) as they may damage the surface or deform the casing as a whole. Do not spray water on the appliance. Air filter The appliance is equipped with a washable air filter.
TROUBLE SHOOTING Before you contact the dealer for claim Please go through the following checklist before calling after-sales service. You might save time and money. The table below adresses the most frequently encountered problems not caused by defects in material or production. Problem Possible Cause Not connected to power supply The appliance does not run Solution Plug into working power outlet and press POWER button Indicator WATER FULL (W. F.
