Installation Guide

AMS-9080 CONTROLLER 8200-0914-01 REV. A
INSTALLATION GUIDE 20 of 22 *8200-0914-01*
Declarations
Regulatory Model: ............................................................................................................................................... LFAMS1803
ID list
Product name
Product code
Model
AMS-9080 Controller
ZE9080
AMS-9080
AMS-1156 Pedestal
ZA1156-12M-1 and ZA1156-12M-2
AMS-1156
Digital Remote Alarm
ZP1060-W ZP1060-G
AMC-1060
Ranger Antennas
ZKRANGER-DG and ZKRANGER-3
UM UPFAF
Satellite Antenna
ZKRXMULLMT
UM POST-M
Amorphous Core Antenna
ZSLOOP-AMRX-1
AMS-3004 RK
Regulatory information
FCC ID: BVCAMSUSUPC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
IC: 3506A-AMSUSUPC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
A separation distance of 2.0cm or more must be maintained between the antenna of this device and persons during device operation.
EMC ............................................................................................................................................................... 47 CFR, Part 15
........................................................................................................................................................................... EN 300 330-2
........................................................................................................................................................................... EN 301 489-3
........................................................................................................................................................................... EN 301 489-1
................................................................................................................................................................................. EN 55032
................................................................................................................................................................................. EN 55024
.................................................................................................................................................................................. ICES-003
................................................................................................................................................................................... RSS-210
Safety ...................................................................................................................................
UL/EN 60950-1 (Second edition)
................................................................................................................................................... EN 62368-1 (Second edition)
................................................................................................................................................................. CSA C22.2.60950-1
EQUIPMENT MODIFICATION CAUTION: Equipment changes or modifications not expressly approved by Sensormatic Electronics, LLC,
the party responsible for FCC compliance, could void the user's authority to operate the equipment and could create a hazardous
condition.
See About the product.