Operator`s manual

2-2 SpeedDome Ultra VI Operator's Manual
Overview of Pan / Tilt / Zoom/Synchronization Options Screen
When Pan/Tilt/Zoom/Sync Opts is selected from the Dome Configuration Menu, the
following screen appears:
PAN/TILT/ZOOM/SYNC OPTS
PROPORTIONAL FLIP OFF/ON
1ST ZOOM STOP X 35/23
MAX TOTAL ZOOM X 46...184
LINE LOCK ON/OFF
RESET TO FACTORY SETTINGS
EXIT
Use this screen to enable or disable the “automatic flip” feature, configure the zoom stop
settings, and set the line lock options.
· To change the settings, move the highlight bar to appropriate field and make the changes.
· To change the settings for this screen to the factory defaults, select Reset to Factory
Settings.
· To return to the Dome Configuration Menu, select Exit.