Operator`s manual

2-4 SpeedDome Ultra VI Operator's Manual
Adjusting the Zoom Stop Settings
The SpeedDome Ultra VI includes a 23X optical zoom camera with 8X digital zoom
capability. The maximum possible zoom is 184X. Zoom stop settings define how the zoom
function is partitioned. Depending on the current zoom level, the camera will either stop at
the first zoom stop setting or continue to the maximum zoom setting. The following example
explains how zoom stop settings work.
The default camera settings are 35X for the first zoom stop setting and 92X for the maximum
zoom setting. If the current zoom level is less than 35X, pressing Zoom In continuously
causes the zoom to stop at 35X. If the zoom level is 35X or greater, pressing Zoom In
continuously causes the zoom to stop at the maximum zoom setting of 92X. The second zoom
stop remains in effect until the zoom function is reduced to less than the first zoom stop
setting (35X) and the zoom button is released for one second or longer. To achieve higher
zoom levels, change the maximum zoom setting.
2X is the margin of error for the zoom stop settings.
Changing the Zoom Stop Settings
1. Select Pan/Tilt/Zoom/Sync Opts from the Dome Configuration Menu.
2. To change the first zoom stop, continue with step 3. To change the maximum zoom
setting, continue with step 5.
3. Move the highlight bar to 1st Zoom Stop X. Change the setting.
· Select 23 to set the first zoom stop to 23X magnification.
· Select 35 to set the first zoom stop to 35X magnification.
The default setting is 35X.
4. To change the maximum zoom setting, continue with step 5. Otherwise, continue with
step 6.
5. Move the highlight bar to the Max Total Zoom X setting. Change the value of the
setting.
· The values for the setting are: 46, 69, 92, 115, 138, 161, and 184X magnification.
The default setting is 92X.
6. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 2-6.