Operator`s manual

3-2 SpeedDome Ultra VI Operator's Manual
Overview of Camera Settings
When Camera Functions is selected from the Dome Configuration Menu, the following
screen appears:
CAMERA FUNCTIONS
Auto White Bal OFF/ON
W Bal Adj: Red 0-511 Blue 0-511
IR Mode OFF/ON/Auto High/Auto Mid/Auto Low
WDR OFF/ON
AGC/Shutter Max Gain Limit
Open Shutter(NTSC)0-28 dB 1/2-1/60 s
RESET TO FACTORY SETTINGS
EXIT
Open Shutter(PAL) 0-29 dB 2/3-1/50 s
From this screen you can adjust the white balance settings, set the IR mode for the camera,
enable or disable Wide Dynamic Range, set the automatic gain control (AGC) feature, adjust
the AGC level, and configure the open shutter settings.
· To change settings, move the highlight bar to the appropriate field and make the changes.
· To change the settings for this screen to the factory defaults, select Reset to Factory
Settings.
· To return to the Dome Configuration Menu, select Exit.