Operator`s manual

Configuring Alarms, Areas, Home, and Privacy Settings 4-7
Assigning the Dome’s Home Position
The home position is a preset or pattern that automatically runs after a designated period of
dome inactivity. Use this option if you want a specific area to be under surveillance after an
operator stops moving the dome.
To assign the home position, select Set Home Position from the
Alarms/Areas/Home/Presets/PZ screen. The following screen appears:
SET HOME POSITION
HOME POSITION NO ACTION
RETURN TIME MINS 1-60 (10)
EXIT
PRESET 1-96
PATTERN 1-3
Tip: When a pattern is selected as the home position, the pattern runs until stopped manually
by issuing a camera command, such as Tilt or Focus.