Operator`s manual

Configuring Alarms, Areas, Home, and Privacy Settings 4-11
Note: When areas are programmed, each area is assigned a default name. Instructions for
assigning new names appear in Chapter 5.
To program areas, select Area Boundaries from the Alarms/Areas/Home/Presets/PZ
screen. The following screen appears:
A
REA BOUNDARIES
PAN to start of BOUND 1-16
PAN RIGHT ONLY
ZOOM to mark BOUNDARY
FOCUS saves and exits
If no boundary is set, pressing Focus quits without making any changes.
The dome supports from 2 to 16 areas.
IMPORTANT
If areas were previously programmed, you cannot restore the previously programmed
boundaries by selecting Quit Without Saving from the Dome Configuration Menu once
you begin making changes the boundaries.