Operator`s manual

5-4 SpeedDome Ultra VI Operator's Manual
Displaying or Hiding All Name Information
The dome provides the ability to display the dome name, the area where the dome is pointing,
the name of the preset or pattern that is running, and alarm names. When the display of
camera or area names is enabled, the information appears on the screen continuously. Preset,
pattern, and alarm names appear only while they are active.
Figure 5-2: Display Locations for Name Information
CAMERA NAME
PRESET NAME/PATTERN NAME
ALARM NAME
AREA NAME
You may choose to disable displaying all name information, or you may choose to display
selected or all name information.
Changing the Display of All Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Disable All Names?
3. Change the setting.
· Select Yes to disable the appearance of all name information.
· Select No to enable the appearance of all or some name information. Then continue
with Configuring Name Information on page 5-8.
The default setting is No.
4. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 5-14.