Operator`s manual

Configuring Text Displayed On-Screen 5-5
Displaying Diagnostic Tests During Reset
You can choose to have dome diagnostic tests run whenever the dome resets. The diagnostic
information displayed includes:
· Communications Loopback Test
· Camera Loopback Test
· Motor Circuit Test.
If you do not want diagnostic information to appear when the dome resets, a screen
displaying the firmware version numbers for the Boot and Application code and the
maximum optical zoom for the dome appears.
IMPORTANT
Enabling diagnostic tests may cause a momentary loss of communication on the network
when the dome diagnostics are executed.
Changing the Display of Diagnostic Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Diagnostic Display.
3. Change the setting.
· If you want diagnostic tests to run when the dome resets, select On.
· If you do not want diagnostic tests to run when the dome resets, select Off. This choice
displays the firmware versions whenever the dome resets.
The default setting is Off.
· Select Exit. The Dome Configuration Menu appears. Continue with What To Do
Next