Operator`s manual

Configuring Text Displayed On-Screen 5-13
IMPORTANT
If you have Privacy Zones enabled, the appearance of the text automatically changes to solid.
Changing the text appearance to translucent will have no effect until the Privacy Zones are
hidden or deleted. See Chapter 4 for more information about Privacy Zones.
Changing On-Screen Text Appearance
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Text Attribute Options and select.
The Text Attribute Options screen appears. The highlight bar appears on Character
Outline.
3. Change the setting.
· Select On to display text with an outline around each character.
· Select Off to display without an outline around each character.
The default setting is On.
4. Do one of the following:
· If you want to change the appearance of the text overlay characters for dome names and
status information, move the highlight bar to Translucent Names. Continue with
step 5.
· If you are finished making changes, continue with step 6.
5. Change the Translucent Names setting.
· Select On to display text associated with dome names and status information as
translucent (slightly clear).
· Select Off to display text associated with dome names and status information as solid.
The default setting is On.
6. Select Exit to return to the On-Screen Text Display screen.
7. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 5-14.