Operator`s manual

SpeedDome Ultra VI Operator's Manual 6-6
Enabling or Disabling Password Protection
Password protection must be enabled before passwords can be used. To enable or disable the
dome password:
1. Select Language/Password from the Dome Configuration Menu.
2. Move the highlight bar to Password Protection.
3. Change the setting.
· Select On to enable password protection.
· Select Off to disable password protection.
The default setting is Off.
4. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next
on page 6-6.
Tip: Instructions for entering the dome password are found in Chapter 1.
What To Do Next
When you select Exit from the Language / Password screen, the Dome Configuration
Menu appears.
DOME CONFIGURATION MENU
PAN/TILT/ZOOM/SYNC OPTS
CAMERA FUNCTIONS
A
LARMS/AREAS/PRESETS/PZ
ON-SCREEN TEXT DISPLAY
LANGUAGE / PASSWORD
DOME INFORMATION
RESET TO FACTORY SETTINGS
QUIT WITHOUT SAVING
EXIT AND SAVE CHANGES
From this screen you can:
· Select an option to make additional changes.
· Restore all settings to the factory defaults.
· Exit the utility without saving changes.
· Save the changes and exit the utility.
Move the highlight bar to an item, and select it. Refer to the related chapter for additional
information.
Cha
p
ter 1
Chapter 2
Chapter 4
Cha
p
ter 6
Cha
p
ter 3
Cha
p
ter 5
Cha
p
ter 7