User's Manual

ManualsBrandsSensors & Software ManualsElectronicsGround Penetrating Radar System

Table Of Contents

1 General Overview
2 Noggin Components
3 Noggin 100 Assembly
4 SmartCart Assembly
- 4.1 Unfold the Handle
- 4.2 Attach Wheels
- 4.3 Attaching Separation Bars to the SmartCart
  - 4.3.1 Separation Bar Assembly
- 4.4 Attaching the Swivel Adapters (Noggin 250, 500 & 1000)
- 4.5 Attaching the Noggin to the SmartCart
- 4.6 Attach the Digital Video Logger (DVL)
- 4.7 Attach the Battery Unit
- 4.8 Adding GPS Mount to the SmartCart
5 SmartTow Assembly
- 5.1 Noggin 100
- 5.2 Noggin 250
- 5.3 Noggin 500 and 1000
6 SmartHandle Assembly (Noggin 500 & 1000 only)
- 6.1 SmartHandle “Pull” Configuration
- 6.2 Cable Connections
7 Rock Noggin Assembly (Noggin 500 & 1000 only)
8 Connecting GPS
9 Digital Video Logger (DVL)
- 9.1 Compact Flash Drive
- 9.2 DVL Temperatures
- 9.3 Running a DVL Detached from a Smart System
- 9.4 DVL Carrier
- 9.5 Connecting the DVL to the Smart System
10 Powering Up the System
11 Locate & Mark Mode
- 11.1 System Settings Screen
- 11.2 Scanning Screen
- 11.3 Locating Screen
- 11.4 Image Settings Screen
- 11.5 Changing the Date and Time
- 11.6 English and Equivalent Icons
12 Survey & Map Mode
- 12.1 Survey & Map Menu
- 12.2 Data Acquisition
- 12.3 Noggin Setup
- 12.4 Noggin File Management
- 12.5 Noggin Utilities
13 Troubleshooting
- 13.1 Power Supply
- 13.2 System Communications
- 13.3 System Overheating
- 13.4 DVL Problem
- 13.5 Noggin Problem
- 13.6 Creating a Test Line for Data Quality
- 13.7 Contacting Sensors & Software Inc.
14 Care and Maintenance
- 14.1 Battery Care
- 14.2 DVL Internal Battery
- 14.3 Cable Care
- 14.4 Skid Pads
- 14.5 Storage Cases
- 14.6 Spare Parts
Appendix A Noggin Data file Format
Appendix B Health & Safety Certification
Appendix C GPR Emissions, Interference and Regulations
- C-1 FCC Regulations (USA)
- C-2 ETSI Regulations for the EC (European Community)
- C-3 Industry Canada Regulations
Appendix D Instrument Interference
Appendix E Safety Around Explosive Devices
Appendix F Using the PXFER Cable and WinPXFER Software
- F1 Transferring Data to a PC using the PXFER Cable
- F1.1 Connecting the Digital Video Logger to a PC
- F1.2 PXFER Cable Types
- F1.3 Installing and Running the WinPXFER Program
- F1.4 Setting the DVL to the PXFER Cable Type
- F1.5 Transferring Noggin Data Buffer Files
- F1.6 Exporting Nogginplus Data
- F2 Transferring One or More Noggin PCX Files to an External PC using WinPXFER
Appendix G GPR Glossaries
- G-1 Basic GPR Terms
- G-2 Common GPR Terms
- G-3 Advanced GPR Terms

4-SmartCart Assembly Noggin

4 SmartCart Assembly

The SmartCart can be configured for operation with all Noggins (100, 250, 500 and 1000).

The fully-assembled Noggin 250 in the SmartCart configuration is shown in Figure 5-1. The

system is shown in field operation in Figure 5-2. Follow the directions below to assemble the

configuration.

Figure: 4-1 Fully assembled SmartCart with a Noggin 250.

Figure: 4-2 Noggin 250 SmartCart (left) and Noggin 100 SmartCart (right) in operation.