User's Manual

2-System Assembly and Startup pulseEKKO PRO
18
2.4.3.3 Connecting the Odometer Cable to the Control Module
The Big Wheel Odometer comes with a long cable that extension to allow it to connect to receptacle 1 on
the control module (Figure 2-24). The Big Wheel Odometer and odometer cable can be seen in the
complete system configuration (See Figure 2-2 on page 3).
Figure 2-24: The Big Wheel Odometer uses a long extension cable (not shown) to attach to receptacle 1 on the control module.
To acquire data with an odometer, the Trigger Method must be set to Odometer (Section 3.3.1.2: P43).