User's Manual

2-System Assembly and Startup pulseEKKO PRO

2.6.5 Using the Software Menus

Menu items can be selected in one of two ways:

1) If the menu item has a number listed beside it, that item can be selected by pressing the

corresponding button number on the DVL. For example, in the above menu (See Figure 2-36

on page 27), pressing the number 1 will select the option for running a pulseEKKO GPR

system.

2) On a menu with items that are not numbered, one of the menu items will be flashing to indicate

that it is currently selected. Pressing the button immediately below the word “Up” or “Down” to

choose another option. Once the menu item is flashing, it can be changed to preset values by

pressing the A or B buttons. Pressing the button under Return will take the user up to the

previous menu level.

The above explanation may sound complicated but having used it a few times, the whole procedure will

become intuitive after a few usages.