User's Manual

3-System Setup Parameters pulseEKKO PRO

X and Y Lines

Set up a first-quadrant XY grid. X data lines run in the X direction, distance increasing from the Y axis

baseline. Line numbers increase in the positive Y direction (see Figure 3-11). Lines must be equally

spaced. Y data lines run in the Y direction, distance increasing from the X axis baseline. Line numbers

increase in the positive X direction. Lines should be equally spaced. The line spacing of the X lines and Y

lines can be different.

It is not critical that all the lines are the same lengths. However, it does make processing easier if all the

lines start at the same baseline position (usually defined as zero (0.0)).

Figure 3-11: The line configuration for lines collected in XY Lines mode. The convention is that X lines are parallel to the X axis

and Y lines are parallel to the Y axis. For seamless integration into data processing software like EKKO_Mapper, note that the

lines are assumed to be collected with X positions increasing away from the Y baseline and the Y positions increasing away from

the X baseline. Line numbers start at line 0 and increment as the lines move away from the axes. The Line Spacing distances needs

to be specified in the grid settings and lines should be equally space, although the X line spacing and Y line spacing can be differ-

ent.