D U A L - D E C K V C R DDV2120 SSC.2120.
W E L C O M E Congratulations... ...on your purchase of this Sensory Science Dual-Deck VCR! We know you will enjoy this product for many years to come. In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the VCR): __________________________________ . About this Manual This manual has been designed to acquaint you with all the features and functionality of the Dual-Deck VCR.
1 - GETTING STARTED 1 1 2 3 4 2 - QUICK TOUR 5 5 7 8 9 3 - COPY 10 Basic Copying ............................................................... 10 Copy Settings ............................................................... 11 4 - PLAY 12 Basic Playback .............................................................. 12 Playback Settings ......................................................... 13 5 - RECORD 14 Basic Recording ............................................................
9 - COMMERCIAL ADVANCE 28 Commercial Advance ................................................... Marking Commercials ................................................... Commercial Advance Playback .................................... Commercial Free Copy ................................................ 28 29 30 31 10 - SEARCH 32 About Index Marks ....................................................... Index Search/Scan ........................................................ Special Search Options .......
READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. R E TA I N I N S T R U C T I O N S The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and maintenance instructions should be followed. CLEANING Unplug this video unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below. spill liquids of any kind onto the unit. Should spillage occur, unplug unit and have it checked by a technician before use.
1 G E T T I N G S TA R T E D This Chapter will guide you through initial setup of your Dual-Deck VCR, including basic connections, Auto Setup, and remote programming.
C O N N E C T I O N S Follow these steps to connect the Dual-Deck VCR to your television and antenna/cable TV. From Antenna or Cable TV To Television To Line Inputs on your Television B A S I C 1 CONNECT ANTENNA/CABLE TV Connect the coaxial cable from your indoor/outdoor antenna or cable TV outlet/cable box to the “IN (FROM ANT.)” jack on the VCR back panel. 2 4 Press POWER on your television, VCR and/or Cable Box. 5 If you chose the Standard RF Option, set your television to channel 3.
POWER 1 press 2 English Français If you have not already done so, make sure you have connected an antenna or basic cable to the “IN (FROM ANT.)” jack on the VCR back panel. Press MENU to continue. Select = 1-2 Choisir = 1-2 press 1 or 2 Connect Antenna or Cable and Press MENU press MENU Searching For Channels Please Wait... CONFIRM ANTENNA/CABLE CONNECTION 3 S E T U P The first time you turn on your Dual-Deck VCR, you will be prompted to set the menu language.
1 C POWER VCR Plus+ Press POWER on your television. T OPY AP TV/VCR 2 C O N T R O L 3 TRK–AUTO–TRK 4 5 6 REPEAT SKIP 7 8 9 SEARCH/INDEX 0 100+ •TV SELECT VCR BRAND SCENE/TITLE TV VIEW •VOL •MUTE •LCV DECK1 DECK2 MENU STILL/ F.ADV REC SP/SLP CLK/CTR CLEAR AUDIO DUB V RE DISPLAY VIDEO DUB FW 3 Pressing the TV key puts the remote control in TV mode. Some or all of the highlighted keys will be able to control your television. CODE(S) Daewoo ..............................
2 Q U I C K T O U R This Chapter provides an overview of the Remote Control, Front Panel, Front Panel Display and On-Screen Display. 0-9 VCR Plus+ T OPY AP E C POWER TV/VCR SLOW 1 2 While watching TV, press to select channels. While in the menu system, press to select menu items. 100+ Press to select cable channels 100 and above. 3 R E M O T E The following is an overview of the Dual-Deck VCR remote control. The keys are listed in alphabetical order.
( C O N T. ) JOG WHEEL SLOW –/+ While a tape is paused, rotate the Jog Wheel forward or backward to advance or rewind the tape one frame at a time. While a tape is playing, press to play the tape in slow motion at variable speeds. SP/SLP LCV While watching TV, press to display the last channel viewed. Press to set the record speed to SP (Standard Play) or SLP (Super Long Play). SLP is three times longer than SP. MENU S T I L L / F. A D V Press to display the VCR’s Main Menu.
DDV2120 Power VCR Deck Select Copy Ch 2 3 1 POWER Press to power the VCR on and off. 2 DECK SELECT Press to switch control between Deck 1 and Deck 2. 3 COPY TAPE Press to copy the tape in Deck 1 to the tape in Deck 2 (see page 10). 4 CH Press to select the next or previous channel. 5 TV/VCR Press to switch back and forth between the TV tuner and the VCR tuner. 6 MENU Press to display the VCR’s Main Menu. 7 REC Press to start recording in the active deck.
D I S P L AY PA N E L F R O N T The following is an overview of the front panel display. 1 DECK 1 2 3 4 5 VCR TIMER COPY SAP S L P 9 1 10 D E C K 1 S TAT U S I N D I C AT O R Lights to show you that Deck 1 is active. Also, graphically displays the status of the tape in Deck 1; e.g., Stop, Play, Rewind, etc. 2 T V / V C R I N D I C AT O R Lights when the Dual-Deck is in VCR mode, turns off when the Dual-Deck is in TV mode, as set by the TV/VCR key.
O N - S C R E E N The following is an overview of the On-Screen Display (OSD). 6 5 4 3 Deck 1 Play 0 : 00 : 00 SP TV VIEW Deck 1 Deck 2 Stop 0 : 00 : 00 SLP Sequential Play Ch 10 1 Fri Jan 12, 2001 Source D AT E A N D T I M E Ch 10 12 : 34 PM 6 When the TV View is set to Channel, Line 1, or Line 2, the date and time are displayed at the bottom of the screen.
C O P Y I N G 3 C O P Y This Chapter will show you how to copy tapes with your Dual-Deck VCR. To set up the Commercial Free Copy feature, please see Chapter 9. Follow these steps to copy a tape from Deck 1 to Deck 2. 1 VCR Plus+ Insert the tape you want to copy in Deck 1. T OPY AP E C POWER TV/VCR 2 2 3 • Make sure the tape has a record safety tab or it will eject when you press COPY TAPE.
C O P Y Follow these steps to set the default Copy Settings for your Dual-Deck VCR. press 1 MENU OPEN MAIN MENU Press MENU. 1 2 3 4 5 6 7 Press 1. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / = Move = Sel SELECT “COPY SETTINGS” 3 ADJUST COPY SETTINGS Press 1, 2, 3, 4, or 5 to set each of the following: 1 - Comm. Free Copy MENU = Quit Please refer to page 31. 2 - EZ Copy press 1 COPY SETTINGS 1 2 3 4 5 Comm.
P L AY B A C K 4 P L AY This Chapter will show you how to play videotapes and set special playback preferences. Follow these steps to play a standard VHS or Super VHS videotape. 1 VCR Plus+ Insert a standard VHS tape or S-VHS tape into Deck 1 or Deck 2. T OPY AP E C POWER I N S E R T TA P E TV/VCR 2 SLOW 1 2 P L AY TA P E Press PLAY 3 . TRK–AUTO–TRK 4 5 6 REPEAT 3 SKIP 7 8 Freeze - To freeze a single frame, press STILL/F.ADV.
1 MENU press Press MENU. 2 MAIN MENU 1 2 3 4 5 6 7 press = Sel 3 Press 1, 2, 3, 4 or 5 to set each of the following: 1 - Deck 1 Hi-Fi MENU = Quit 2 PLAYBACK SETTINGS 1 2 3 4 5 Deck 1 Hi-Fi Deck 2 Hi-Fi Dual Playback Auto Play/Rewind COMMERCIAL ADVANCE / = Move press = Sel A D J U S T P L AY B A C K S E T T I N G S On On Off Both MENU = Quit 1 for Deck 1 Hi-Fi 2 for Deck 2 Hi-Fi 3 for Dual Playback On – The VCR will play the Hi-Fi audio track on tapes in Deck 1.
This Chapter will show you how to record television programs and set recording preferences. Follow these steps to record a television show currently in progress. 1 C POWER VCR Plus+ Record Safety Tab TV/VCR 2 SLOW 1 2 4 5 • SP – Standard Play, for best quality. • SLP – Super Long Play, for maximum recording time (3 times longer than SP).
1 OPEN MAIN MENU Press MENU. press MENU 2 SELECT “RECORD/EDIT SETTINGS” Press 3.
T I M E R R E C O R D I N G 6 T I M E R R E C O R D This chapter provides step by step instructions for programming Timer Recordings. Follow these steps to program your VCR to record up to 16 events. press 1 MENU INSERT TAPE Insert a blank tape with a record safety tab into Deck 1 or Deck 2.
...continued 6 Use the 0-9 keys or UP/DOWN/RIGHT arrow keys to set the length of the event in hours and minutes. SET LENGTH (H) [0-9] : 0 Aug 2001 10:30PM 1H00M 1 Su Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 1-Time use 1 Aug Th 2 9 16 23 30 Ch10 Deck 1 0 9 Fr 3 10 17 24 31 Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 We 1 8 15 22 29 Ch10 Th 2 9 16 23 30 Sa 4 11 18 25 Set Length (H) Enter the hours as a 1-digit number; e.g., for one hour, press “1.
E R R O R S R E C O R D I N G ...continued 1 Aug 10 SET SPEED Press 1, 2, or 3 (or use the UP/DOWN/RIGHT arrow keys) to set the record speed. SET SPEED [1-3] : 1 2001 10:30PM Su Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 1-Time press We 1 8 15 22 29 Ch10 1 Th 2 9 16 23 30 Deck 1 3 1H00M Fr 3 10 17 24 31 Sa 4 11 18 25 Auto to set speed Activates Complete Program Record (see note below). 2 - SP Standard Play. Use for best quality (a T-120 tape will record for 2 hours).
7 V C R P L U S + This chapter provides step by step instructions for setting up and programming VCR Plus+ recordings, a patented and greatly simplified method of timer recording. press 1 MENU Press MENU. 2 MAIN MENU Press 3. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / = Move press = Sel 3 4 MENU = Quit 3 = Move press = Sel Off Timer Auto Auto MENU = Quit SELECT “VCR PLUS CHANNEL SETUP” Press the right arrow key.
W O R K S H E E T P L U S + V C R 20 The following list contains many of the standard VCR Plus+ channel numbers used in the US and Canada. The first group consists of Cable TV stations and the second group consists of Broadcast TV stations. Use the spaces beside each channel to fill in the local channel for your viewing area.
V C R Follow these steps to program a VCR Plus+ recording. You will need a local TV listing that includes VCR PlusCode numbers. VCR Plus+ 1 press 2 Enter Code [ with (0-9) Use the 0-9 keys to enter the 2- to 8-digit VCR PlusCode number shown in your local television programming guide. ] • To correct your entry, press CLEAR. • Press VCR Plus+ to continue.
E X T E N D T I M E R Follow these steps to extend VCR Plus+ recording a few minutes before and after the scheduled event. This will help to ensure that the entire event is recorded.
8 E D I T This Chapter will show you how to use the 8-Scene Editor, A/V Dubbing, and the On-Screen Titler to make your own home movies. press 1 MENU Insert your source tape (original footage) in Deck 1. MAIN MENU 1 2 3 4 5 6 7 2 Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / I N S E R T S O U R C E TA P E = Move press = Sel I N S E R T TA R G E T TA P E Insert your target tape in Deck 2.
1 C POWER VCR Plus+ BEFORE YOU BEGIN — • Turn off EZ Copy; see page 11. • Turn off Auto Play; see page 13. T OPY AP E E D I T I N G Follow these steps to edit your tapes manually using the COPY TAPE button. TV/VCR 2 SLOW 1 2 INSERT SOURCE TAPE Insert your source tape (original footage) in Deck 1. 3 TRK–AUTO–TRK M A N U A L 4 5 6 REPEAT 3 7 8 Insert your target tape in Deck 2. Make sure the tape has a record safety tab.
1 Line 2 INSERT TAPE To dub from the microphone or a device connected to the rear line 2 input. If you have connected BOTH a microphone AND another source device to the rear A/V inputs, the Dual-Deck VCR will ONLY recognize the microphone as Line 2. Insert the tape you wish to dub in Deck 2. 2 POSITION TAPE Play the tape to the point where you want to begin dubbing and press STILL/ F.ADV. 3 Tu n e r To dub from the currently selected television channel.
I N S E R T Follow these steps to insert a new audio track, such as recorded music or narration, onto your target tape. The new audio can be recorded from the front line inputs, rear line inputs, or a microphone. 1 press OPEN MAIN MENU Press MENU. MENU 2 SELECT “COPY SETTINGS” Press 1.
O N - S C R E E N Follow these steps to add titles or credits to your home movies using the On-Screen Titler. 1 MENU Press MENU. press 2 MAIN MENU 1 2 3 4 5 6 7 = Move = Sel 3 4 / = Move = Sel Off Timer Auto Auto 5 S AV E Y O U R M E S S A G E Press MENU to save your message and exit the menu system.
9 COMMERCIAL ADVANCE This Chapter will show you how to use COMMERCIAL ADVANCE to skip commercials during playback of recordings, and remove marked commercials from copied tapes. If you have ever wanted to watch TV without commercials, COMMERCIAL ADVANCE is for you. The first step is to mark groups of commercials while recording a TV show. 1 press Press MENU. 2 MAIN MENU 1 2 3 4 5 6 7 = Move press = Sel 3 S E L E C T “ C O M M E R C I A L A D VA N C E ” Press 5.
M A R K I N G 8 CONFIRM OR CANCEL When recording is stopped, the VCR will alert you that, “The VCR will begin marking commercials in 59 seconds...” • No action is required to mark the commercials on the recording; simply wait 59 seconds for the confirmation screen to count down. C O M M E R C I A L S • If you are not present for the 59 second countdown, the VCR will automatically mark the commercials anyway; e.g.
COMMERCIAL ADVANCE PLAYBACK Follow these steps to automatically skip marked commercials while watching a taped TV show. 1 press Press MENU. 2 MAIN MENU 1 2 3 4 5 6 7 = Move = Sel S E L E C T “ P L AY B A C K S E T T I N G S ” Press 2. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue/Idioma / OPEN MAIN MENU MENU 3 S E L E C T “ C O M M E R C I A L A D VA N C E ” Press 5.
Follow these steps to remove all marked commercials while making a copy of a taped TV show. press 1 MENU OPEN MAIN MENU Press MENU. 2 Press 1. MAIN MENU 1 2 3 4 5 6 7 Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / = Move press = Sel 3 • On – The VCR will exclude marked commercials while copying tapes. • Off – The VCR will include marked commercials while copying tapes.
This Chapter will show you how to locate recordings on your videotapes, as well as scan through the previews at the start of rented movies. Follow these steps to place Index Marks on your recordings. W H AT A R E I N D E X M A R K S ? C POWER VCR Plus+ Index Marks are like bookmarks on your videotapes. They are inserted automatically at the start of every recording, or you can place them manually anywhere on a tape. Later you can locate these “bookmarks” using Index Search or Index Scan.
SEARCH press 1 INDEX Insert a videotape in Deck 1 or Deck 2. • If the tape has a record safety tab, you will see the menu at left. SEARCH MENU • If the tape is missing the record safety tab, please see MOVIE ADVANCE on page 35. Index Search/Scan Blank Search Direct Time Search Return to 0:00:00 Manual CA Playback 2 / = Move = Sel press OPEN “SEARCH MENU” While the tape is stopped or playing, press press SEARCH/INDEX.
O P T I O N S S E A R C H S P E C I A L Follow these steps to find the nearest blank segment of tape, find a specific tape counter position, or return to 0:00:00. SEARCH press 1 INDEX Insert a videotape in Deck 1 or Deck 2. • If the tape has a record safety tab, you will see the menu at left. SEARCH MENU 1 2 3 4 5 • If the tape is missing the record safety tab, please see MOVIE ADVANCE on page 35.
Follow these steps to enjoy MOVIE ADVANCE, a handy feature that automatically finds the beginning of the movie on most rented and purchased video tapes. You can also use MOVIE ADVANCE to selectively watch or skip the previews. SEARCH press 1 INDEX I N S E R T TA P E Insert a purchased/rented video in Deck 1. • MOVIE ADVANCE works in Deck 1 only. SEARCH MENU Is This a Purchased/Rented Movie? 1 2 • Tapes must be recorded in SP with the record safety tab removed. 2 Press SEARCH/INDEX.
APPENDIX R F O U T P U T C H A N N E L A A D VA N C E D C O N N E C T I O N S This Chapter will show you how to connect additional components, such as a cable box, stereo, or satellite receiver, to your Dual-Deck VCR. Follow these steps to change the RF Output Channel from 3 (the default) to 4 in the menu system. This feature takes the place of the standard Ch3-4 rear panel switch.
1 PLUG IN CABLE MOUSE Plug the supplied Cable Mouse into the Cable Box Control jack on the back of your Dual-Deck VCR. PEEL OFF TAPE COVERING Peel off the tape covering from the bottom of the Cable Mouse. 3 A T TA C H C A B L E M O U S E Position the Cable Mouse on top of the Cable Box directly over the IR (Infrared) sensor. Make sure the front half of the Cable Mouse extends over the front of the Cable Box (see illustration). 4 OPEN “MAIN MENU” Press MENU. 5 SELECT “RECORD/EDIT SETTINGS” Press 3.
...continued press 9 Press the down arrow key until Cable Box Output is selected, then press the right arrow key to select from the following options: 7 VCR Plus+ Setup VCR Plus Channel Setup Timer Extend Cable Box Control Cable Box Code Cable Box Output / = Move = Sel SET “CABLE BOX OUTPUT” Off Off ### Line 1 • Ch ## — Indicates that your cable box is connected to the “IN (FROM ANT.)” jack on the VCR back panel and is tuned to Channel 2, 3, or 4.
S T E R E O / M O N I T O R Follow these steps to connect your Dual-Deck VCR to a stereo system, stereo television, or monitor TV. Connect to Stereo Auxiliary Inputs, OR Connect to Stereo TV or Monitor TV Line Inputs 1 CONNECT VCR TO STEREO Connect RCA cables from the ”Line Out 1” audio jacks (R and L) on the back of the VCR to the line inputs on your stereo receiver.
H O O K U P O T H E R A / V Follow these steps to connect your Dual-Deck VCR to an external audio/video component, such as an additional VCR, laser disc player, DVD player, camcorder, satellite receiver, video game, etc. Connect to Audio/Video outputs of External Device 1 CONNECT DEVICE TO VCR Connect RCA or S-Video cables from the audio/video outputs of your external device to the audio /video inputs on the front or back of the VCR.
1 CONNECT EXTERNAL DEVICE TO VCR Connect an S-Video cable from the audio/video output of your external device to the “S-Video In” jack on the VCR rear panel. 2 OPEN “MAIN MENU” 3 SELECT “VCR SETTINGS” Press 5. 4 S E L E C T “ A D VA N C E D S E T T I N G S ” Press 7. 5 SELECT “LINE 2 VIDEO IN” Press 4 to set Line 2 Video In to one of the following: H O O K U P Press MENU. Connect to S-Video Output of External Device; e.g., DVD Player.
O U T Follow these steps to connect your Dual-Deck VCR to a second display or recording device, such as a TV or additional VCR. This is useful for monitoring both decks while copying or editing. 1 CONNECT DEVICE TO VCR A / V Using RCA cables, connect the VCR to a second display or recording device. 2 OPEN “MAIN MENU” Press MENU. SELECT “VCR SETTINGS” 2 3 Press 5. L I N E 4 S E L E C T “ A D VA N C E D S E T T I N G S ” Press 7. Connect to the input of your secondary display/ recording device.
L I N E Follow these steps to label the front and rear A/V inputs; e.g., if you have a DVD Player connected to the rear line inputs, you can change the label from “Line 2” to “DVD” throughout the menu system. press 1 MENU OPEN “MAIN MENU” 2 MAIN MENU 1 2 3 4 5 6 7 Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / = Move Press 5. 3 S E L E C T “ A D VA N C E D S E T T I N G S ” Press 7.
APPENDIX L A N G U A G E S E T T I N G S B CUSTOM SETTINGS This Chapter will show you how to customize your Dual-Deck VCR experience, with settings that affect language, clock, channels, displays and more. Follow these steps to set the on-screen menu language to English or French. press 1 MENU OPEN “MAIN MENU” Press MENU. 2 MAIN MENU 1 2 3 4 5 6 7 Press 7 repeatedly to set the on-screen menu language to English or French.
1 2 Press 5. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / = Move = Sel press SELECT “VCR SETTINGS” 3 SELECT “CLOCK SETTINGS” Press 6.
S E T T I N G S If Auto Clock Set is not available in your area, follow these steps to set the clock manually (see notes below before proceeding). press 1 MENU Press MENU. 2 MAIN MENU C L O C K 1 2 3 4 5 6 7 = Move = Sel press SELECT “VCR SETTINGS” Press 5. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / OPEN “MAIN MENU” 3 SELECT “CLOCK SETTINGS” Press 6.
D AY L I G H T Follow these steps to set Daylight Savings Time manually. You should only set “Daylight Savings” if Auto Clock Set set the time incorrectly. 1 MENU press OPEN “MAIN MENU” Press MENU. MAIN MENU 1 2 3 4 5 6 7 2 Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue = Move = Sel press Press 5. 3 Press 6.
S E T T I N G S Follow these steps to set all Channel Settings for your Dual-Deck VCR, including Channel Source, Add/Remove Channel, Show Weak Channels and Channel Audio. 1 MENU press Press MENU. 2 MAIN MENU C H A N N E L 1 2 3 4 5 6 7 = Move press = Sel SELECT “CHANNEL SETTINGS” Press 4.
V C R Follow these steps to customize the functionality of the Dual Deck VCR, including Child Lock, Remote Eject, Front Panel Display, On-Screen Display, and RF Output Channel. 1 OPEN “MAIN MENU” 2 Press 5.
S E T T I N G S FA C T O R Y Follow these steps to reset the Dual-Deck VCR to its factory settings. If you wish, you may preserve your clock settings and any saved timer recordings. press 1 2 3 4 5 6 7 2 = Move = Sel SELECT “VCR SETTINGS” Press 5. Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue / OPEN “MAIN MENU” Press MENU. MAIN MENU 3 S E L E C T “ A D VA N C E D S E T T I N G S ” Press 7.
APPENDIX C H E L P This Chapter provides customer support information, as well as a list of frequently asked questions, technical specifications, and the product warranty. Phone: (480) 922-0896 Office hours: Monday-Friday, 6:00 a.m. to 9:00 p.m. MST Saturday-Sunday, 8:00 a.m. to 4:00 p.m. MST E-Mail: “customerservice@sensoryscience.com” Web: “www.govideo.com” or “www.sensoryscience.com” SYMPTOM SOLUTION(S) No picture. • Press TV/VCR until VCR indicator lights on front panel display.
SYMPTOM SOLUTION(S) Cannot Timer Record. • Set clock to correct time; see page 46. • If using cable box, turn on Cable Box Control in menu system; see page 37. Copy speeds do not match. • Turn Speed Matching on; see page 11. Tape ejects during copy or record. • Place piece of tape over record safety tab opening. VCR automatically plays and rewinds. • To turn Auto Play/Rewind off; see page 13. • Turn EZ-Copy off; see page 11. 8-Scene Edit List not working. • Insert source tape in Deck 1.
1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance; chrominance: converted sub system phase shift. TELEVISION SYSTEM NTSC-type color signal EIA standard (525 lines, 60 fields) AUDIO TRACK Normal: 1 track; Hi-Fi: 2 track TAPE WIDTH 12.7 mm, 1/2 inch TAPE SPEED SP: 33.35 mm/s; SLP: 11.
W A R R A N T Y DUAL-DECK VCR LIMITED WARRANTY W h o P r o v i d e s t h e L i m i t e d Wa r r a n t y During the warranty period, the Sensory Science Warranty Administrator will honor Dual-Deck VCR service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Dual-Deck VCR remote controls are warranted for 90 days from the date of purchase.
0-9 keys 5 1-Time 17 100+ key 5 8-Scene Edit List 15, 23 A A/V Dub 25 Add Channel 48 AM/PM indicator 8 Audio Outputs 39 Source 26 Audio Dub 25 Audio Dub key 5 Auto Channel Search 3, 48 Auto Clock Set 3, 45 Auto Commercial Free Copy 31 Auto Play/Rewind 12, 13, 24 Auto Setup 3 Auto Show Finder 32, 33 Auto Stop, A/V Dub 25 B Background Blue 30 Video 30 Batteries, Insert 1 Blank Search 34 C Cable 48 Cable Box 37 Cable Box Code 37, 38 Cable Box Control 37 Cable Box Output 38 Cable Box Record Source 17 Cable M
S Manual CA Playback 34 Menu key 6, 7 Microphone 26 Monitor Hookup 39 Mono 48 Multimedia Control Port 40 Multimedia port 40 Mute key 6 S-VHS 12 S-Video Hookup 41 S-Video In 41 Safety iii SAP 48 SAP indicator 8 Satellite Receiver 36, 40 Scan Index Marks 33 Scene/Title key 6, 23, 27 Screen Display 49 Search Features 32, 34 Search Index Marks 33 Search/Index key 6 Sequential Playback 13 Sequential Recording 15 Show Weak Channels 48 Shuttle 12 Shuttle ring 6 Simulcast 17, 48 Skip 12 Skip Edit 24 Skip key 6 Sl
D D V 2 1 2 0 M E N U S Y S T E M MENU MAIN MENU Copy Settings Playback Settings Record/Edit Settings Channel Settings VCR Settings Timer Recording Language/Langue 1 2 3 4 5 6 7 1 2 / = Move = Sel 3 On Off On Off Auto MENU = Quit Deck 1 Hi-Fi Deck 2 Hi-Fi Dual Playback Auto Play/Rewind COMMERCIAL ADVANCE 1 2 3 4 5 5 / = Move = Sel On On Off Both MENU = Quit 5 / = Move = Sel Scene: MENU = Quit / 6 VCR SETTINGS No Stereo Ch Up / Dn or 0 - 9 For Chan MENU = Quit = Sel = Move =
Thank you for purchasing this Sensory Science Dual-Deck VCR! Sensory Science specializes in developing and marketing innovative digital entertainment products, including digital televisions, Internet media players, DVD players, and high-end home theater components for the digital living room. We take pride in our ability to deliver unparalleled customer support, and are honored to have received the prestigious Inside Track award for Supplier Loyalty two years running.