User's Manual

µltraWaveProductguide Page 13
Post-mount alignment
For optimal performance, ensure that the μltraWave transmitter and receiver are aimed directly
toward each other, and that the mounting height is correct for both units (see Figure 10
).
1. Measure and verify the mounting heights of both units.
2. If required, loosen the transmitter’s gear clamp slightly, and then carefully aim the transmitter
directly at the receiver.
3. Tighten the transmitter’s gear clamp.
4. If required, loosen the receiver’s gear clamp slightly, and then carefully aim the receiver
directly at the transmitter.
5. Tighten the receiver’s gear clamp.
6. If required, loosen the four bolts that attach the post collar to the mounting bracket and aim
the units (in the vertical axis) toward each other. Re-tighten the bolts.
Figure 9 Post-mounting procedure