User's Guide

FPGMR User’s Guide VO.1 7 OF 8 03-17-06
TO BE USED ONLY FOR THE PURPOSE FOR WHICH IT IS SUBMITTED. ALL RIGHTS RESERVED TO SENSUS METERING
SYSTEMS. REPRODUCTION WITHOUT WRITTEN CONSENT IS PROHIBITED.
When the Installation process has begun, the METER INSTALL OK LED will blink red
repeatedly showing that the installation is in progress.
*IMPORTANT* Hold the handheld in position until the METER INSTALL
OK LED stops blinking red or turns solid green.
When the installation process is complete, if successful, the METER INSTALL OK LED
will turn solid green for approximately four seconds. If the installation is not successful,
the METER INSTALL OK LED will not be lit in any color. If the meter installation
process is not successful, the installation process may be repeated. If the installation
fails two consecutive times, the meter is not functioning properly and should be
replaced.
METER
INSTALL OK
LED