User's Manual

AMR Transmitter Mounting Instructions for American Meter
AC250, AL175, AL250, AL5B, AL225, AL425
2
Components
Verify that all the required components for the installation are available:
GS0001 AMR Transmitter Index cover (supplied with the transmitter)
Hardware
Screw kit (see Appendix – Transmitter Installation Screws as identification
guide):
 4x mounting screws (thread length 1”)
 2x index screws (thread length ⅜”)
 4x index cover screws (thread length ¾”)
 2x snap seals
Tools
Verify that all the required tools for the installation are available:
 #1 Phillips screwdriver
 Flat screwdriver (blade size ¼”)
 Small flat screwdriver (blade size 5/32”)
 Stiff blade putty knife
 Pointed tweezers (required for index screw placement)
 ¼” Nut driver