User's Manual

AMR Transmitter Mounting Instructions for American Meter
AC250, AL175, AL250, AL5B, AL225, AL425
5
Remove index
1. Remove and properly dispose the two (2) screws holding the index onto the
meter, with small flat or Phillips screwdriver.
2. Remove the index and carefully clean any debris from it. Inspect for proper
index operation by turning the input shaft and verifying that the gearing turns
freely. Also, inspect the index for any missing or broken hands. Place the
index, or a new index if necessary, on a clean surface near you for
reinstallation later.
3. With a putty knife, scrap away any gasket material that remained on the
meter when the index cover was removed.