User's Manual

1608 4th Street Suite 200 Berkeley CA 94710| [e-mail] | P 510.548.4620 F 510.548.8264
1608 4th Street Suite 200 Berkeley CA 94710
|
[e-mail]
|
P 510.548.4620 F 510.548.8264
Congure Repeater
Select a repeater from the image map
to access the Repeater Conguration
window with the Position tab open. The
Name eld allows the repeater’s name
to be user-dened.
Note: Repeater’s rmware version is
displayed for reference only.
Repeater Conguration Window
3
Select an upstream channel by clicking
the Cong tab. Select an entry for the
Current Upstream Ch eld by clicking on
the Change to drop-down list.
Specifying Upstream Channel
Select a entry for the Current
Downstream Ch eld by clicking the
Change to drop-down list.
Specifying Downstream Channel
Quick Start Guide: FLEX-RP-B/FLEX-RP-B-LL
• The default radio channel for access
point to repeater communications is
0 (zero).
• The default radio channel for repeater
to sensor communications is 1 (one).
• Never use the same channel for
both access point and sensor
communications.
Refer to Sensys Network VDS240 Wireless
Vehicle Detection System TrafcDOT v2.10 Set
Up and Operating Guide for more information.
Channel Notes
• When an installation contains multiple
repeaters with more than ten sensors,
changing one or more repeaters from
Current Cong 0 to Current Cong 1
allows the repeater to communicate
with up to 20 sensors.
Refer to Sensys Network VDS240 Wireless
Vehicle Detection System TrafcDOT v2.10 Set
Up and Operating Guide for more information.
Cong Notes