User's Manual
1608 4th Street Suite 200 Berkeley CA 94710
|
www.sensysnetworks.com/resources
|
P 510.548.4620 F 510.548.8264
Connect to Access Point
Select an access point from the list of APCCs
and Access Points and click Connect.
Note: Ensure the box for Load Map Data is
checked before clicking Connect.
Select IP address
Click the icon to start TracDOT2.
Run TrafcDOT
2
The Main window displays. The map on the Main window populates
and congured equipment appears on the map and in the sensor tray
at the bottom of the window.
Note: Before conguring or reconguring a repeater, ensure the correct
repeater is selected on the map by verifying the serial number.
Main Window
Requirements
FlexNode Line Powered
requires TrafficDOT2
software 2.12.0 or later.
Quick Start Guide: FlexNode Line Powered Radio (NA)