Industrial PDA User Manual V3.0-1.
Industrial PDA Brief Introduction First and foremost, thanks for buying this rugged tablet PC. This user manual includes module introduction, maintenance, wiring and operation as well as the solutions to module problems. In order to guarantee the proper operation of this tablet PC, please read this manual in detail before using; keep the manual in a safe and convenient place for quick response when problems appear.
Chapter I Industrial PDA Summary and System Structure 1. Summary This tablet PC is a portable and digital data acquisition equipment that combines 1D/2D barcode scanner, RFID reader, infrared meter reading, GPS and telephone function. It can be widely used in the area of power, survey and draw, routing inspection, asset management and industrial manufacturing etc.
Industrial PDA features of user friendly, easy to operation, visual scanning and recognizing result, it can meet your different needs, and transfer the data at real time, as well as improve your working efficiency. It is really your powerful working assist. 2. Checking the Package Please open the packing box to make sure the accessories are correct before operation. Once there are some incorrect items or any need of optional accessories, please contact with us.
Industrial PDA Z 2 2D laser Barcode 8 7 Infrared Meter Reading T Infrared Temperature w Measurement 1D laser barcode scanning module 2D laser barcode scanning module 2D laser barcode scanning module 2D S-OFF barcode scanning module Infrared Meter optional optional optional optional Reader module Infrared Temperature Measurement module Standard Accessories: Please make sure all the following accessories are in good condition: Charger USB Line
Industrial PDA User Manual Other optional Accessories: (Users can choose according to different modules.) Earphone USB-OTG cable USB-Serial line 3.Safety Warning and Attentions In order to use the tester safely and efficiently, please read the following information before using. Please use the tester according to the rules when you in the hospital. Please keep far away from the precision instrument Do not use chemical solvent to clean the equipment. Do not throw away the waste battery.
Industrial PDA Please do not use or store the equipment as well as its accessories under the environment of high temperature, low temperature, high humidity or dust. Please put the equipment and its battery in a safety place and avoid strong shake and impact. When use the equipment for the first time, please charge the battery completely. Don't disassemble the equipment by yourself. If you need, please go to the appointed professional organization to mend it.
Industrial PDA range. The LCD display effect will change a little in the temperature severely-changed and long-time conversation environment. 4. General Operation Standards and Attentions 4.1. Operation Standards USB port Please do not short the port with metal; otherwise the internal circuit will be damaged. Cleaning The shell of this instrument is mainly made of plastic, when cleaning, use dry and soft cloth, and do not use volatile chemicals, otherwise, it will cause discoloring and deformation.
Industrial PDA If the instrument is unused for a long time, the battery characteristics may have deteriorated. And it will also take a longer time to charger. If it take a very short time to charger and the operating time is extremely short, please replace the battery. Faults If there is strange sound, smell, or smock coming from the instrument, please turn off the instrument and unplug of the power, and then contact with us immediately. 4.2.
Industrial PDA 5.
Industrial PDA NO Name Functions Sealing cover to dustproof and 1 Sealed cover 2 Screen Display the window 3 F1 key Extended functional Button 1 4 Return key To return the last operation 5 The Home key To go to the main page quickly 6 Menu key 7 F2 Key Extended functional Button 2 8 MIC MIC 9 Indicator 10 Front Camera Used to take pictures Flashlight Flashlight can 11 waterproof Long press to enter the task management Used to indicate the equipment status be used for eme
Industrial PDA 19 Headphone Hole To connect with headphone 20 Charging Hole Used to charge 21 USB Port 22 Power key Used to power on 23 Infrared For infrared meter reading 24 Barcode scanner port Used to barcode scanning 25 Volume Button- Used to reduce the volume 26 Volume Button+ Used for increase the volume Used to connect with PC or for charging Buttons: Buttons Name Power Button Volume Button+ Volume Button- Functions Under power-on state, shortly pressing the button can clo
Industrial PDA Extended functional Button Return Button Main Screen Button Attribute Button Bar Code Scan Button Used for user customized buttons. Return back to the previous page. Pressing this button to return back to the main screen window. Used to edit menu properties After opening the barcode scanning function, used to scan the barcode. Indicator lights: Top left of the equipment has indicator, when charging, the indicator is red, when fully charged, indicator turns green.
Industrial PDA 6. Instructions of Fixed Icon Display Area means GSM signal intensity; The more column bar is, the better thsignal intensity will be. Means that there is unread multimedia message Means the signal intensity of the WLAN. Means Bluetooth function has been opened. Means uploading or downloading files. Means that there is unread short message. Means it is in vibration mode Means it is in the flight mode.
Industrial PDA 7. Charging Battery Icon : The battery is in low power and needs to charge. : The battery is charging and displays in motion. : The battery has already been full. 8. Install TF Card, SIM Card Open the seal cover on the top of the equipment, find TF card slot, in the lower left adjust TF card gap, put TF card into the card slot, when there is a slight sound of clicks, the other end of TF card is nearly awash to TF card slot.
Industrial PDA TF card will pop up, take down TF card. Take down SIM card, open the seal cover on the top of the equipment, press SIM card to the direction of card slot, SIM card will pop up, take down SIM card. 9. Battery Usage Battery performance The standby time will be affected by system environment, system setting, service test, taking photos and using data service. Calling or opening a backlight will consume more power than standby and standby time will shorten.
Industrial PDA equipment for charging. Insert the charger into the power socket with 100~240V, 50/60Hz. When it is charging, the battery power icon on the screen will shine; after charging finished, the battery power icon on the screen will stop shining. After charging finished, pull the charger out of the equipment and then pull the charger out of the power socket. Charging time If the AC voltage is very low, you should charge the battery for a long time.
Industrial PDA ■ When it is not charging, please take the charger from the outlet. ■ When it is charging in very low battery, the tester will not start immediately and will display low battery prompt if you do booting operation. After charging for a while, the tester will start normally. ■ Charger is safety device, please use our specialized charger. Meanwhile, please be careful during the usage. 2. General Functions 2.1.
Industrial PDA Close the equipment Under standby interface, long press the power key to pop up an option menu and then choose "Power Off" to close the equipment. 2.2. Standby and Wake up Under the "on" condition, the system will enter into standby state or shortly press on/off key to enter into standby state. Under standby condition, shortly press on/off key to wake up the system. (The time entering into standby is relevant with the backlight time setting in setup options.
Industrial PDA Main menu “Set>Show>Dormancy”, we can set the delay time of device before dormancy. 2.4 Application of device vibration Device supports 2 vibration modes, one is the only Vibration, the other one is Ring & Vibration. We can press volume- for long time until it becomes represents vibration mode.
Industrial PDA Chapter Ⅱ Usage and Maintenance The following suggestions are helpful for the users to use and maintain this tester. Put the tester and all the accessories in the place where the children can't reach. Please keep the equipment dry. Because there may be mineral substance in the rain, moisture and various liquids which can corrode the circuits.
Industrial PDA Don't put the tester in the low temperature place. Because when you move the tester from lower temperature place to the normal temperature place, there will be moisture inside of the tester, which may damage the circuits board. Please don't try to uninstall the tester because the improper operation of the nonprofessional person may lead to the damage of the tester. Please don't throw, hit or shake the tester because all rude using method break the inside main board.
Industrial PDA Chapter Ⅲ Faults and Solutions If you meet the following problems during the using process, please try to use the "Faults and Solutions" first to do the relative operation. If the problems still exist, please contact the professional maintenance person. Problem Unable to switch on the tester Some programs can't be used normally. The standby time is not Reason The time of pressing the power key is not enough. Solution Press the power key for over 2 seconds and more.
Industrial PDA enough. declines. Play games and music for a long time. Poor contact Limit the time of playing games and music. Check the contacts or change plug. There will be no Low battery vollabele Charging fault then unplug it to recharge. Battery fault Change battery. Wrong charger Change proper type charger. Charger fault The battery electricity is The equipment is automatically closed charging display. Charging for about half an hour and severely not enough. Change or mend the charger.
FCC CAUTIONS 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
Absorption Rate (SAR) information: This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.