Instructions / Assembly

Technical Specifications
Model.............................................................................................. FM100P
Cutting Style ................................................................................... Microcut
Shred Size .................................................................0.2” x 0.39” (5 x 10mm)
Sheet Capacity .............................................................................. 10 sheets
Shred Speed Max Sheet Capacity .............................. 6.56 ft/min (2.0 m/min)
Intake Throat Width ................................................................ 8.7” (220mm)
Dimensions (l x w x h) ............... 14.25” x 7.68” x 15.35” (362 x 195 x 390mm)
Weight ...............................................................................12.57 lbs (5.7 kg)
Basket Capacity ....................................................... 3.04 gallons (11.5 liters)
Run Time (min) ...................................................... 2 mins. ON / 30 mins. OFF
Noise Level (motor)..............................................................................73 dB
Product / Cutter Warranty ................................................... 1 Year / 1 Year
How To Use Your Shredder
Setup Instructions:
1. Mount the shredder correctly to the basket.
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable
equipment, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
3. Slide the switch to ON position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care
when mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly
functioning.
3. This shredder will safely shred sealed envelopes so long as the number of layers
of (folded) paper does not exceed the maximum sheet capacity of the shredder.
CAUTION: When shredding sealed envelopes, be certain that non-paper objects,
such as metal coins, credit cards, plastic items, etc., have been removed. Doing
so may damage the shredder and will invalidate the product’s warranty.
4. It is normal for residual lubricant in the motor to burn off during the rst several
extended uses of your shredder. Should you notice a slight burning odor or the
presence of small wisps of smoke during the rst several extended uses, you may
continue using the shredder. If either symptom continues to occur after repeated
use, please contact technical support for assistance.
10-SHEET
MICROCUT
PAPER SHREDDER