SDS

Sentinel 810 All Surface Floor Cleaner
Safety Data Sheet
Prepared according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
09/14/2015
Sentinel 810 All Surface Floor Cleaner
3/5
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No exposure limits noted
8.2. Exposure controls
Appropriate engineering controls
:
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
:
Gloves. Protective goggles.
Hand protection
:
Use gloves chemically resistant to this material when prolonged or repeated contact could
occur. Gloves should be classified under Standard EN 374 or ASTM F1296. Suggested glove
materials are: Neoprene, Nitrile/butadiene rubber, Polyethylene, Ethyl vinyl alcohol laminate,
PVC or vinyl.
Eye protection
:
Eye protection should be worn when possibility exists for eye contact due to spraying liquid or
airborne particles. Use good industrial practice to avoid eye contact.
Skin and body protection
:
No protection required.
Respiratory protection
:
No protection required.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Appearance
:
Color
:
Odor
:
Odor Threshold
:
pH
:
Relative evaporation rate (butyl acetate=1)
:
Melting point
:
Freezing point
:
Boiling point
:
Flash point
:
Self ignition temperature
:
Decomposition temperature
:
Flammability (solid, gas)
:
Vapor pressure
:
Relative vapor density at 20 °C
:
Relative density
:
Solubility
:
Log Pow
:
Log Kow
:
Viscosity, kinematic
:
Viscosity, dynamic
:
Explosive properties
:
Oxidizing properties
:
Explosive limits
:
SECTION 10: Stability and reactivity
10.1. Reactivity
No dangerous reactions known under normal conditions of use.
10.2. Chemical stability
Stable under recommended handling and storage conditions (see section 7).