User's Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司
Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室
Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五
17 032104A-1
7. Press the SA/MEMO button to confirm.
IMPORTANT: It is not advisable to save a telephone number without the corresponding
name in the Phonebook. This will lead to improper displays on Private and Out of Area calls.
NOTE: When no active buttons are pressed for 20 seconds, the LCD Display will
automatically return to STANDBY mode.
PLACING CALLS FROM THE PHONEBOOK
1. Press the SA/MEMO button.
2. Press the
or button to find the one you want to call.
3. Press the TALK button to dial out the telephone number.
4. Start your conversation.
5. To end your conversation, either press the TALK button or place the handset on the
base unit.
NOTE: Be sure to check that the line is not in use by another extension.
DELETING A STORED NUMBER
1. Press the SA/MEMO button.
2. Press the
or button to find the one you want to delete.
3. Press the RE/PA/DEL button. The unit will ask you to delete the selected telephone
number and the LCD Display will show “EARSE ITEM?”.
4. Press again the “RE/PA/DEL button to delete. The LCD Display will show
“ERASED”.
5. Press the SA/MEMO button to return to STANDBY mode.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1. If you only have pulse (rotary dialing) service in your area and want to access Tone
services (Bank by Phone , etc.), ensure that the T/P (Tone/Pulse) switch on the bottom
of the base unit is set to the Pulse position.
2. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily.
Pulse dialing mode resumes when the call is ended.
ERASE ITEM?
604-555-1212
#
1
TOTAL
20