User's Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司
Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室
Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五
32 032104A-1
SYMPTOM SOLUTION
The Caller ID panel
is blank
• Check the power connection.
• Check the telephone line cord connections.
• Check the batteries for proper installation.
The Caller ID does
not show the caller’s
name and/or phone
number
• The Caller ID unit will not function until you have Caller
ID service provided by your local phone company. Call
your local phone company to have Caller ID installed on
your telephone line.
• If you pick up the phone before the second ring, the caller
information will not be correctly received. If you have
telephone answering device(TAD) connected with the
unit, set the TAD to answer after two rings or more.
• If it is a blocked call or an out-of-area call, the caller’s
name and/or phone number will not appear on the display.
• If only the caller’s phone number appears on the display,
it may be Single Data Message Format(SDMF) call, as
opposed to a Multiple Data Message Format (MDMF)
call. Please call your local phone company to see which
service you have.
Random characters
and/or “NO DATA”
appear on the LCD
display
• On rare occasions, the Caller ID information sent by the
telephone company may have an error in the transmission.
This is not the fault of your Caller ID unit. It can only
capture and store the data that was received.
Cannot get call
Waiting identification
on the LCD panel
• Subscription to Caller ID Call Waiting (CIDCW) is
required from your local phone company for the CIDCW
function to operate properly. Call you local phone
company for details.
AC ADAPTOR:USE ONLY WITH CLASS 2 POWER SOURCE, OUTPUT 9VDC,
200mA .
THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE
PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
OWNER’S MANUAL.