User's Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司
Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室
Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五
14 032104A-1
3. Use the TELEPHONE KEYPAD button(0-9) to enter the name, (see the
“TELEPHONE KEYPAD CHARACTERS SETTING” section ) you can store up to 15
characters.
4. Press the
button once.
5. Enter the telephone number using the TELEPHONE KEYPAD button(0-9). You can
store up to 16 digits.
6. Press the SA/MEMO button to save into memory
7. Press the SA/MEMO button to go back to standby mode.
NOTE: If there are no memory locations left in the phonebook, the unit will display
“ MEMORY FULL”. To continue with memory programming, you must delete or edit
existing speed dial numbers.
If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to
STANDBY mode.
It will not save a duplicate telephone number or a name without the corresponding telephone
number in the Phonebook.
A. PREFERRED CALLS(VIP)
You an assign PREFERRED CALL which will generate a special ringer sound at start of the
second ring to any welcome caller in the Phonebook.
1. Press the SA/MEMO button.
2. Press the
or button to find the one you need.
3. Press the MEMU/MUTE button once. The LCD Display will show “VIP”.
4. Press the SA/MEMO button to save the preferred call and go back to STANDBY
mode.
B. BLOCKED CALLS
You can assign a BLOCKED CALL which will disable the ringer sound from the second
ring to any caller in the Phonebook.
1. Press the SA/MEMO button.
2. Press the
or button to find the one you need.
3. Press the MEMU/MUTE button twice. The LCD Display will show “REJ”.
4. Press the SA/MEMO button to save the preferred call and go back to STANDBY
mode.
VIP
JOHN SMITH
888-555-1212
#
1 TOTAL20
REJ
JOHN SMITH
888-555-1212
#
2 TOTAL20