User's Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司
Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室
Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五
18 032104A-1
PAUSE FUNCITON
• In some cases, such as PABX or long distance service, a pause may be needed in the
dialing sequence. Pressing the handset RE/PA/DEL button inserts the programmed
time interval between dialed numbers.
FLASH FUCTION
• Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
CHANNEL SELECTION(40 Channels)
• Your cordless telephone lets you select a channel from the 40 frequencies available
to transmit signals between the base unit and handset. If the existing channel becomes
noisy or starts having interference, you can either move closer to the base unit or press
the OPT/SCAN button on the handset until a better reception is found.
OUT OF RANGE WARNING
• The handset and base unit communicate up to a certain maximum range. The distance
can be affected by weather, power lines, or even other cordless telephone.
• If you are far away from the base unit, the handset beeps and “ OUT RNAGE” is
shown on the LCD Display to warn you that the background noise level is too high for
proper communication between the handset and the base unit.
• When you hear this sound and see the “OUT RANGE” display, you should move
closer to the base unit. Otherwise, the call will automatically cut off after 20 seconds.
LOW BATTERY WARNNIG
• When the handset battery voltage level is low, the handset LCD Display shows “LOW
BATTERY”.
• Return the handset on the base cradle to charge.
PAGING FUNCTION
• If you have misplaced the handset or need to alert person nearly the handset, press
the PAGE button on the base unit. Each press of this button will activate the handset to
beep for 20 seconds and LCD Display shows “PAGING” while it is being paged by the
base unit.
NOTE: Even if the handset is in RING OFF mode, the base unit can page the handset.
CALLER ID OPERATION