User's Manual

SENTON Enterprises Limited 信 通 企 業 有 限 公 司
Flat 10, 17/F, Fo Tan Industrial Centre, 香港沙田火炭坳背灣街 26-28 號
26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T., Hong Kong 富騰工業中心 17 樓 10 室
Tel: [phone] Fax: [phone] 電話: (八五二) 二六八七 一七一二 (四線)
E-mail address: [e-mail] 傳真: (八五二) 二六八七 四一二五
041504A-1 29
3. Press the FLASH/EDIT button.
4. Press the UP
or DN button to select the ON or OFF. FIRST RING ON is the preset
mode.
5. Press the SA/PHONE BOOK button to save the setting.
6. Press the MENU/OPTION button to go back to standby mode.
C. TIME SET
Set the date and time.
1. Press and hold the MENU/OPTION button.
2. Press the TELEPHONE KEYPAD #3 button.
3. Press the FLASH/EDIT button.
4. Use the TELEPHONE KEYPAD button to enter the month, date, hour and minute.
The cursor moves automatically after entering each item.
Press the TELEPHONE KEYPAD #1 for AM setting, or
Press the TELEPHONE KEYPAD #2 for PM setting.
5. When the final setting is programmed, the time and date are automatically saved.
6. Press the MENU/OPTION button to go back to STANDBY mode.
NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service
from your local telephone company.
D. AREA CODE
1. Press and hold the MENU/OPTION button.
2. Press the TELEPHON KEYPAD #4 button.
3. Press the FLASH/EDIT button.
4. Use the TELEPHONE KEYPAD buttons to enter the three digit area code.
5. Press the SA/PHONE BOOK button to save the setting.
6. Press the MENU/OPTION button to go back to standby mode.
E. CONTRAST
This unit enables you to select 3 brightness levels for the Large LCD Display.
1. Press and hold the MENU/OPTION button.
2. Press the TELEPHON KEYPAD #5 button.
3. Press the FLASH/EDIT button.
4. Press the UP
or DN button to adjust the brightness of the display. Level 2 is the preset
brightness.
TIME SET
10:03
AM
12/25
#
3
TOTAL
10
AREA CODE
- - -
#
4
TOTAL
10