User's Manual

070203A-1

OWNER’S MANUAL

# 36287

ver.

070203A-1

Page: 12 ENGLISH VERSION

CAUTION: You must use a Class II, 120 Volt AC/9 Volt DC adaptor that delivers at

least 200mA. The center tip must be positive and the plug must correctly fit the unit’s DC

9V jack.

Plug the AC adaptor into a standard AC outlet.

2. Insert the small plug inot the DC 9 jack on the rear of the base unit as shown in Figure

HEADSET CONNECTION

One of the special features of your phone is that your handset could utilize a headset(not

included) for hands-free communication. Insert the small plug at the end of your headset

cord to the headset jack at the side of the handset as shown in Figure 6. Follow the

procedures discussed in “Placing a Call” when to place and receive a call.

Note: The headset jack of your cordless telephone is compatible with 2.5mm headset plugs

only. When you plug in the headset into the headset jack, it automatically mutes the

microphone and speaker of the handset. Unplug the headset to return the handset to normal

use.

Base Unit

AC Outlet

9VDC Adaptor

DC 9V Jack

AC Adaptor

Plug

(Figure 5)

Handset Jack

(Figure 6)

Tone/Pulse

Switch