User's Manual

070203A-1

OWNER’S MANUAL

# 36287

ver.

070203A-1

Page: 18 ENGLISH VERSION

1. Press the SAVE/MEMO button.

2. Press the or button to find the one you want to call.

3. Press the TALK button to dial out the telephone number.

4. Start your conversation.

5. To end your conversation, either press the TALK button or place the handset on the

base unit.

NOTE: Be sure to check that the line is not in use by another extension.

DELETING A STORED NUMBER

1. Press the SAVE/MEMO button.

2. Press the or button to find the one you want to delete.

3. Press the RE/PA/DELETE button. The unit will ask you to delete the selected

telephone number and the LCD Display will show “EARSE ITEM?”.

4. Press again the “RE/PA/DELETE button to delete. The LCD Display will show

“ERASED”.

5. Press the SAVE/MEMO button to return to STANDBY mode.

MIXED MODE DIALING (Temporary Pulse to Tone Dialing)

1. If you only have pulse (rotary dialing) service in your area and want to access Tone

services (Bank by Phone , etc.), ensure that the T/P (Tone/Pulse) switch on the rear of

the base unit is set to the Pulse position.

2. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily.

Pulse dialing mode resumes when the call is ended.

PAUSE FUNCITON

•

In some cases, such as PABX or long distance service, a pause may be needed in the

dialing sequence. Pressing the handset RE/PA/DELETE button inserts the programmed

time interval between dialed numbers.

FLASH FUCTION

• Used to access custom calling features such as Call Waiting or Three-Way Calling

provided by your local phone company. Flash can also be used to restore a dial tone to

make a new call.

ERASE ITEM?

604-555-1212

TOTAL