Manualshelf

User's Manual

ManualsBrandsSenton Enterprises ManualsElectronics2.4GHz Cordless Phone Base and Handset System
21222324252627282930
27
070203
A-1
OWNER’S MANUAL # 36287 ver. 070203A-1
Page: 27 ENGLISH VERSION
4. Use the TELEPHONE KEYPAD buttons to enter the three digit area code.
5. Press the SAVE/MEMO button to save the setting.
6. Press the MUTE /MENU button to go back to standby mode.
F. CONTRAST
This unit enables you to select 3 brightness levels for the Large LCD Display.
1. Press and hold the MUTE/MEMU button.
2. Press the TELEPHON KEYPAD #6 button.
3. Press the FLASH/EDIT button.
4. Press the or button to adjust the brightness of the display. Level 2 is the preset
brightness.
5. Press the SAVE/MEMO button to save the setting.
6. Press the MUTE /MENU button to go back to standby mode.
G. PBX NUMBER
This unit enables you to preset the PBX number (such as an 8 or 9) while you are using a
switchboard system.
1. Press and hold the MUTE/MEMU button.
2. Press the TELEPHON KEYPAD #7 button.
3. Press the FLASH/EDIT button.
4. Press the or button to select PBX number.(9 is the preset PBX number)
5. Press the SAVE/MEMO button to save the setting.
6. Press the MUTE /MENU button to go back to standby mode.
H. PBX MODE
This unit enables you to turn ON/OFF the PBX system depending on the telephone
system you are using.
1. Press and hold the MUTE/MEMU button.
2. Press the TELEPHON KEYPAD #8 button.
3. Press the FLASH/EDIT button.
4. Press the or button.
PBX MODE OFF- set for direct line access. The preset PBX mode is off.
PBX MODE ON- When connected to a switchboard system.
5. Press the SAVE/MEMO button to save the setting.
6. Press the MUTE/MENU button to go back to STANDBY mode.
NOTE: When placing a call in PBX mode ON, this telephone will automatically add
the PBX number and a pause time before the dialed telephone numbers.
I. PAUSE TIME
CONTRAST
2
#
TOTAL
PBX NO.
9
#
TOTAL
PBX MODE
OFF
#
TOTAL