User's Manual

SYLVANIA Z-Wave Lighting and Appliance Control System Manual

4.1.5 Controlling scenes

To re-call the scenes 1-6 first press the “Scene prefix button” . The

Remote Control will indicate that it

is in scene selecting mode by showing

S e l e c t s c e n e

in the display.

Then press the Speed button where you created your lighting scene. For scenes

7-32 press the Scene prefix button and use the Navigation buttons to select the

desired scene. Press the OK button to activate the scene. Note from the scene

mode you can only activate/turn on a scene. To turn off a selected scene you

must turn off the individual lights or groups of lights as you normally would from

the group mode. (See section 4.1.1. for help to create a group.)

4. Now press and release the button on the Outlet Adaptor Dimmer that

you want to include in the scene.

When “Set level then hit OK” is shown in the display set the light level to

the desired level using the Remote Control or by pressing the Outlet

Adaptor button directly and press OK on the Remote Control to store

the light level.

6. Con

tinue to the next Outlet Adaptor Dimmer to be included in the scene

and repeat step 4 and 5.

7. When you have assigned all Outlet Adaptor Dimmers to be included in

the scene press OK to save.

8. Press the OK button to create the scene.

You have now programmed a scene. You can create up to 30 scenes. Note

that scenes can include switched off Outlet Adaptor Dimmers.

Note: Hitting” c” will not units that have been stored in the selected scene. A

unit is stored when “ unit included” is shown in the display.