User's Manual

SYLVANIA Z-Wave Lighting and Appliance Control System Manual

4.1.6 Remove Outlet Adaptor from group/scene

You can remove an Outlet Adaptor Dimmer or High Power from a group/scene

by doing the following:

1. Enter the Group Menu

2. Go to “Remove switch from

group” using the Navigation

buttons and press OK

3. Select the group

(number/name) from which

you want to remove the

Outlet Adaptor Dimmer or

High Power. Press OK.

4. Press OK again if you are

sure you want to remove an

Outlet Adaptor Dimmer or

High Power from the group.

5. Press the Outlet Adaptor

button on the Outlet Adaptor

Dimmer or High Power you

want to remove.

6. You have now removed the

Outlet Adaptor Dimmer or

High Power from the group

To remove an Outlet Adaptor Dimmer

from a scene enter the scene menu

and use same procedure as described

above.

Note: If you wish to move an Outlet

Adaptor Dimmer or High Power to a

new location you should reset the

Outlet Adaptor flowing the instructions

in section 5.5.1. and assign the Outlet

Adaptor Dimmer or High Power to the

Remote Control in the new location.

Clear cancels the current

selection.

Arrows only work if more than

one group/scene exists.