User's Manual
SYLVANIA Z-Wave Lighting and Appliance Control System Manual
43
A replication of a remote is done by :
1. Select “ Receive information” on the controller which should receive the
information (i.e. the Secondary controller)
2. select “Send information” and either “identical copy” or “Only system
information” on the remote that is to send the information (i.e. the Primary
controller).
3. Wait until transmission is completed and both the controllers’ ends.
4. If a transmission error occurs. Please repeat from 1.
Considerations:
1. It is important to note that all information on the receiving remote will be
deleted before any information is received.
2. Burglar deterrent and timer information is not copied to the slave remote.
3. Slave remotes can not be used to add newly acquired or reset Units to the
network.
4. If nodes are moved physically it should be done as mentioned in 5.5.1 and
the replication should be repeated.
5. New nodes added to the network is not automatically known by the slave
remotes, but has to be transferred to it by repeating replication, or by
adding the newly created node to a group or scene on the slave
remote(before it is known by it ).