User's Manual

SYLVANIA Z-Wave Lighting and Appliance Control System Manual
50
Errors you might
encounter
Reasons What you do
The Remote Control
You press and hold
the Speed button and
press the Outlet
Adaptor button to
include a new Outlet
Adaptor - but nothing
happens
1. The Outlet Adaptor
belongs to a different
system than yours.
2. Reset the Outlet
Adaptor. See Set-up
menu section 5.5.1.
You keep
receiving ”Group
Failed” or “Scene
failed” on the display
when you try to turn
the “lights” on or off.
One of the following
reasons:
1. You are too far away
from one or several of
the Outlet Adaptor
you’re trying to control
2. One or several Outlet
Adaptors you are
trying to control are
disconnected from
power.
1. Check the
distance to the
nearest Outlet
Adaptor.
2. Check if the
power to all the
Outlet Adaptors
is turned on.
If you want to
disconnect an
Outlet Adaptor
remember to
reset it before
disconnecting to
prevent error
messages. See
Set-up menu
section 5.5.1.
The display on the
Remote Control goes
blank after some time.
To save power the display
will turn off automatically
after 5-10 seconds. If
you’re in the menu the
power will turn off after 1
minute without activity.
Press any button
and the power in the
display switches on
again.
8 Troubleshooting