User Manual

be sure the headset is in power off status first. Press and hold the MFB for 5-6 seconds until
red and blue LED blink alternately, then release the MFB, the unit is becoming pairing mode.
2.2 Pairing the headset with Bluetooth mobile phone:
Make sure your mobile phone with Bluetooth function. Then, turn on its Bluetooth function
and searching Bluetooth device.
2.3 Keep the headset and mobile within 0.8 meter when pairing.
2.4 Make the Bluetooth headset in pairing mode, after searched, select the model No “EH-03L” in
the Bluetooth device list.
2.5 After successful pairing ,the red LED of headset will be quickly blinks.
Wearing the headset
The string of headset is retractable, the user could be adjust it until feel comfortable.
Making calls with the headset
Function Status of headset Operation
Answer calling Ringing Press MFB shortly
Volume up Conversation model Press +key
Volume down Conversation model Press - key
Warning: Excessive pressure on the headset would cause hearing loss.
TROUBLESHOOTING GUIDE
Symptom Possible Problems Solution
The headset
does not turn
on.
- No power.
- Power Switch is not set to “ON”
correctly
- Recharge batteries enough time with
cable .
Press MFB( Power switch) on about 3
second again.
There’s no
music from the
headset
- The headset hasn’t pair the
Bluetooth device.
- Too Long distance between the
headset and device
-
- turn of the headset and turn on it
again. And make the Bluetooth device
in the status mode.
- short the distance between the
device..
-