User's Manual

The FCC Needs You to Know: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Move the transmitter to a different physical location. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. • If you cannot eliminate the interference, the FCC requires that you stop
using your headphones.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) Pay attention to all the warnings that have been mentioned in this user-manual! 2) Do not use this apparatus near water. 3) Clean only with a dry cloth. 4) Do not block any ventilation openings.Install by referring to the manufacturer's
instructions.
5) Do not install near heat sources such as radiator, heat registers,stoves or
other apparatus including amplifiers that produce heat.
6) Do not ignore the main purpose of a polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other.A grounding-type plug has two blades and a third grounding prong.The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrican for replacement of the obsolete outlet.
7) Do not walk on the power cord and do not pinch any plugs or
convenience receptacles(including the point at which they exit from the apparatus.)
8) Only use attachments and accessories specified by the manufacturer. 9) Unplug the apparatus during thunder storms or when not in use for long periods of time. 10) Refer all servicing to qualified service personnel.Servicing is required when
the apparatus has been damaged.The following are examples of when certain situations arise and it is necessary to contact a qualified personnel for servicing.
-When the power-supply cord is damaged. -Liquid has been spilled onto the apparatus. -Objects have fallen into the apparatus. -The apparatus has been exposed to rain or moisture. -The apparatus has been dropped.
Sentry warrants this product to be free from defects in materials and workmanship for a ninety day period from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at: P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose your original sales receipt and a check for $10.00 for return shipping & handling. Limited Ninety-Day Warranty: IMPORTANT SAFETY INSTRUCTIONS:
VISIT US ONLINE:WWW.SENTRYINDUSTRIES.COM
The FCC Needs You to Know: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Move the transmitter to a different physical location. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. • If you cannot eliminate the interference, the FCC requires that you stop
using your headphones.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) Pay attention to all the warnings that have been mentioned in this user-manual! 2) Do not use this apparatus near water. 3) Clean only with a dry cloth. 4) Do not block any ventilation openings.Install by referring to the manufacturer's
instructions.
5) Do not install near heat sources such as radiator, heat registers,stoves or
other apparatus including amplifiers that produce heat.
6) Do not ignore the main purpose of a polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other.A grounding-type plug has two blades and a third grounding prong.The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrican for replacement of the obsolete outlet.
7) Do not walk on the power cord and do not pinch any plugs or
convenience receptacles(including the point at which they exit from the apparatus.)
8) Only use attachments and accessories specified by the manufacturer. 9) Unplug the apparatus during thunder storms or when not in use for long periods of time. 10) Refer all servicing to qualified service personnel.Servicing is required when
the apparatus has been damaged.The following are examples of when certain situations arise and it is necessary to contact a qualified personnel for servicing.
-When the power-supply cord is damaged. -Liquid has been spilled onto the apparatus. -Objects have fallen into the apparatus. -The apparatus has been exposed to rain or moisture. -The apparatus has been dropped.
Sentry warrants this product to be free from defects in materials and workmanship for a ninety day period from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at: P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose your original sales receipt and a check for $10.00 for return shipping & handling. Limited Ninety-Day Warranty: IMPORTANT SAFETY INSTRUCTIONS:
VISIT US ONLINE:WWW.SENTRYINDUSTRIES.COM